The maximum thickness of 3000W fiber laser cutting machine cutting different materials: the maximum thickness of carbon steel is 22mm.
The maximum thickness of stainless steel is 12mm. The maximum thickness of the aluminum plate is 8mm. The maximum thickness of the copper plate is 8mm.
How to use laser cutting machine:
1. Follow the instruction manual of the laser cutting machine, and start the equipment strictly according to the above procedures.
2. The personnel who operate the equipment must be trained by the laser cutting machine manufacturer before taking up their posts.
3. When processing materials, you must wear necessary protective equipment, such as protective glasses.
4. Refuse to use laser for irradiation and processing before clarifying the processing materials.
5. After the laser cutting machine is started, there must be full-time personnel present to prevent unauthorized leaving. If you need to leave, you should turn off the equipment.
6. Near the laser cutting machine processing, there should be fire extinguishers and other equipment at hand.
7. During the processing, if any abnormal situation is found, stop the machine immediately, and then find a special person to inspect it.
8. The laser cutting machine equipment after use must be cleaned in time to make adequate preparations for the next processing.
9. Regularly inspect the laser tube, auxiliary gas and other consumables on time and in quantity. Make sure you have enough.
10. When the laser cutting machine is working, it should pay attention to observe whether there is any abnormality in every detail of the machine tool.