Article Source：www.siemelaser.com.com Author:Eagle CNC Edit release time:2018-12-28 15:22 Views:
a. Before starting the machine every day carefully check the pressure of the working gas and cutting gas of the laser. If the gas pressure is not enough, it should be replaced in time.
b. Check the X-axis zero point, Y-axis zero point, Z-axis zero point, laser preparation status and other buttons for damage (check indicator).
c. Check whether the zero point of the X-axis, Y-axis, and Z-axis, the limit switch, and the mounting screw of the collision block are loose, and whether the limit switches of each axis are sensitive.
d. Check if the circulating water level in the chiller is sufficient. If it is insufficient, it must be added in time.
e. Check whether there is leakage in the circulating water path of the external light path, and the leak must be handled in time, otherwise the life of the optical lens will be affected.
f. After the daily cutting is completed, check the focus mirror lens for damage.
g. Check if the telescopic skin cavity of the external light path is burned out or damaged.
h. After the daily work is completed, clean the cutting waste in time, clean the work site, and keep the work site neat and clean. At the same time, do a good job of cleaning the equipment to ensure that all parts of the equipment are clean and free of stains, and no parts can be placed in
any part of the equipment.
j. After the daily work is completed, the drain valve of the air reservoir at the bottom of the air compressor is opened for drainage, and after the waste water is discharged, the drain valve is closed.
k. After the daily work is completed, press the shutdown step to shut down, then turn off the total power of the entire machine.
Fiber laser cutter,plasma,waterjet cutting.Which one is most suitable for your business?...TIME：19-04-29
Jinan Sieme CNC Equipement CO.,LTD.
Address: No.12111 Jingshi Road,Lixia District,Jinan City,Shandong,China