Welcome to visit Jinan Sieme CNC Equipement CO.,LTD Official website!
  • |
  • |
  • |
  • |
  • |
  • |
  • |
Jinan Sieme CNC Equipement CO.,LTD. specializes in the manufacture of Laser cutting machine
  • fiber laser cutting machine
  • laser metal cutting machine price
  • sheet metal fiber cutting machine
  • metal pipe fiber cutter
    • fiber laser cutting machine
    • laser metal cutting machine price
    • sheet metal fiber cutting machine
    • metal pipe fiber cutter

    SM3015CR Fiber laser metal plate and pipe cutting machine

    • category:Metal tubes &plates fiber laser cutter
    • Model:SM3015CR
    • Views
    • Brandsiemelaser
    • Working size:3000mm*1500mm/4500mm*1500mm/6000mmx2000mm
    • Power:500W/750W/1000W/1500W/2000W/3000W
    • Cut:0.4mm to 20 mm CS0.4mm to 12mm SS
    • Price Range:$46600.00 to $138800.00 according to configuration
    • product manual

      Machine Introduce:

      SM3015CR fiber laser cutting machine can adopt different power(500Watt,750W,1000W,1500W,2000W,

      2500W,3000W).It can cut both metal sheet and metal pipe.It can cut sheet max. 20mm carbon steel and 12mm stainless steel(for pipe cutting capicity is little thin than sheet).Diameter for pipe is 20mm to 220mm.And SM3015CR Fiber laser cutting machine is widely used to cuttiing different metal,such as steel,aluminum,brass,copper,alloy,iron.

      Machine Description:

      1.Bed and beam

      1.1 Aviation level Aluminum alloy high strength beam

      1.2 Aviation level aluminum alloy is light.Acceleration is fast

      1.3 Segmented welding bed,improve bed stability,Prevent bed deformation.Lifetime is more than 20 years.

      1.4 High precision CNC fixed working table


      2.Raycus Fiber Laser Generator

      Low Energy Consumption: Save energy and protect environment.Photoelectric conversion rate is up to 25-30%.Lifetime is more than 100,000 hours

      3. Automatic Focusing Height Follower.

      Automatic sensor senses ensure good cutting quality and avoid the damage of nozzle and head.


      4.Drive System

      4.1 X,Y axis all adopt Japan servo motor system and driver system.

      Match-able with transmission system improve cutting speed and precision 

      4.2 Separated cabinet proof dust and ensure electricity system working stable and being long lifetime.


      5.Rack and pinion and ball screw 

      Imported guild rail.Grinding level double rack X Y axis.High precision and work stable.

      6.Control System:

      6.1 Cypcut control system with English language.

      6.2 Software with flying cutting mode for some small design.It saves time.

      6.3 With nesting function for save material

      7.Dual Use for metal plates and pipes cutting

       SM3015CR fiber laser cutting machine can not only cut metal plates, but also metal pipes. It can adopts 3 meters or 6 meters pipe cutting tool.Widely used for many kinds of pipe cutting.Save cost and Increase efficiency.


      8.Clamp Design

      It adopts an electric clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-200mm.Rotary tools adopts rack and pinion transmission,it accuracy can be 0.02mm.

      9.Fractional Automatic Support For Pipe 

      It employs intelligent pipe support design,which can solve the deformation problems in the process of long tube cutting.Reduce scrap rate.

      Optional parts:

      IPG fiber source,exchange plateform,whole machine cover 

      Machine Parameters:

      Machine Model SM3015CR
      Laser Power 500W,750W,1000W,1500W,2000W,2500W,3000Woptional
      Dimensions 4600*2450*1700mm
      Working area 3000*1500mm
      Repeat positioning accuracy±0.02mm
      Maximum speed 120m/min
      Maximum acceleration1.5G
      Voltage and frequency380V 50Hz/60Hz

      Industry Applications

      Since sheet and pipe integrated design, Industry adaptability of SM3015CR has been greatly enhanced, including petroleum and pipe material, fitness equipment and other pipe material mainly mechanical processing, automotive manufacturing, kitchen appliance,electrical control box ,mechanical equipment

      electrical equipment,lighting hardware fittings,elevator manufacturing,auto parts ,hardware and metal processing ,machine cabinet and other board materials mainly mechanical processing, etc. 

      Specially used for cutting 0.5-5mm carbon steel sheets (pipes), 0.5-2.5mm stainless steel sheets, galvanized steel(pipes), electrolytic zinc-coated steel sheet(pipes), silicon steel(pipes) and other kinds of thin metal sheets and pipes. Range of pipe diameters: 20-220mm.



      1. Clear whole fiber laser cutting machine carefully

      2. Put on a tray which made by steel structure and water resit plywood.

      3. Dust-proof cabinet packed by plywood box independent.

      4. Laser source and spare part put on laser bed.

      5. If put in normal container.It save shipping cost.

      However Fiber machine is to wide to put in if packed by plywood box.

      5.1 Fiber 1325 model packed by protect foam and film.

      5.2 Fiber 3015 model need to dismantled some parts then paked by protect foam and film.

      6. If put in frame container,fiber laser cutter packed by plywood box after protect foam and film packing.


      After-sales service and commitment

      SIEME CNC implement the business philosophy of “ using strength to cast brand ,using quality to survive ,using innovation to make the progress, using the best service to win in the market “. SIEME CNC not only keep improving in the laser equipment but also use the best service to move customers . The satisfaction of customers is our highest goal ,our company will improve services and quality of products ,the aim is to create maximum value for customers . We are here to make the promise of serve you with the most intimate after-sales service

      1.professional and free after-sales training

      Our company has the professional after-sales technical team ,  providing customers prompt door-to-door or online technical guidance , which can ensure customers are skilled in the equipment application in a short time . At the same time , after-sales technical team would visit customers regularly ,asking customers the using of equipment and upgrade the software of equipment for customers.

      2.after-sales outlets are all over the world

      Our company has global customer service center , it has 16hours/day online customer service, which can solve all kinds of problems for domestic and foreign customers, our customer service will feedback problems to technical department and productive department , which would give you a satisfactory process of solving problem ,  ensuring constantly creation of money for you.

       3.the feedback of customer satisfaction survey

      Company ‘s  after-sales service and technical department will visit customers regularly , inquiring your degree of satisfaction about the equipment and service , we would form proposal according to customer’s  feedback,  the aim of it is finding continuous improvement.

      4.the warranty commitment of equipment

      The machine’s  warranty is one year ( not including optical devices and quick-wear parts), except that ,control software is free to upgrade . At the same time ,we guarantee that we will give you the most satisfactory answer for your question whether it is inside or outside of the machine.

      Picture name:SM3015CR Fiber laser metal plate and pipe cutting machine Image Source:www.www.siemelaser.com Author:Eagle CNC Views: